Services / Appliance installation

Appliances connected safely, working the day they arrive

Ovens, cooktops, rangehoods, dishwashers and dryers installed and connected by licensed electricians — with dedicated circuits added where the load needs them. Homes across Western & South-Western Sydney.

Call 0452 473 532 Request an assessment

EXCELLENT★★★★★5.0 · 125+ Google reviews

★★★★★ 5.0 · 125+ Google reviewsNSW Electrical Contractor Licence 359722CNECA MemberClear written pricing before workTesting & compliance documentationFamily-owned local team

01What we connect

Kitchen and laundry appliances, wired in properly

Hard-wired appliances legally need a licensed electrician — and everything works better installed properly.

Ovens

Wall ovens and freestanding stoves hard-wired to the right circuit with correct isolation — tested under load before we leave.

Cooktops

Induction and ceramic cooktops often draw more than the unit they replace — we check the circuit and cable size before connecting.

Rangehoods

Ducted and recirculating rangehoods wired in neatly, with the switch somewhere you can actually reach.

Dishwashers

Connected safely with correct isolation — and a dedicated circuit where the kitchen needs one.

Dryers

Heat-pump, condenser and vented dryers connected and checked — stacked or side by side.

Dedicated appliance circuits

New circuits run from the switchboard with safety-switch protection, so a big appliance never overloads what is already there.

02Our process

From box to working

Tell us the appliance

Make and model plus a photo of where it's going — we'll confirm what the circuit needs.

Fixed quote

One price for the connection, any circuit work and removal of the old unit if you like.

Install & connect

Correct circuits, correct isolation, manufacturer's spec — warranty-safe.

Test & demonstrate

Tested under load and demonstrated working before we pack up.

M&J electrician on a home improvement job

03Our promise

Installed to spec, warranty intact

A DIY connection can void an appliance's warranty — and a bad one can be dangerous. We install to the manufacturer's spec and Australian standards, so your new appliance works properly and stays covered.

✓Licensed connections that keep warranties valid

✓Dedicated circuits added where the load needs it

✓Old appliances disconnected and removed on request

04Instagram

Straight off the tools

See the full gallery →

mandjelectricalworks

View Instagram post by mandjelectricalworks

Aug 31

Open post by mandjelectricalworks with ID 18111353252089687

Renovating? The electrician should be involved before the walls close.

At this Bonnyrigg Heights garage conversion, the homeowners brought us in early enough to plan the new lighting and appliance circuits while the cable routes were still accessible.

That gave us a practical route back to the switchboard before the next finishes went in.

If you’re planning a renovation, send us your suburb, a few photos and a quick description of what you’re changing. We’ll tell you what should be assessed before the build schedule is locked in.

#BonnyriggHeights #HomeRenovation #WesternSydneyElectrician #ResidentialElectrician #mandjelectricalworks

43 5

mandjelectricalworks

View Instagram post by mandjelectricalworks

Aug 26

Open post by mandjelectricalworks with ID 17964723675155479

A good electrician shouldn’t leave you guessing. ⚡

For us, the job isn’t just about turning up, completing the electrical work and moving on to the next one.

We want the homeowner to understand what we’ve found, what we’re recommending and what’s actually been done in their home.

That means taking the time to explain the work, answer questions, properly test what we’ve completed and leave the customer feeling confident, not confused.

These photos are from a recent residential job in Bossley Park.

If you’re looking for an electrician who’ll take the time to properly assess the job and explain your options clearly, M & J Electrical Works services homes throughout Western Sydney.

#BossleyPark #WesternSydneyElectrician #ElectricalSafety #ResidentialElectrician #mandjelectricalworks

77 2

mandjelectricalworks

View Instagram post by mandjelectricalworks

Aug 20

Open post by mandjelectricalworks with ID 18112607567064779

How often should you have your home’s electrical system checked? ⚡

It’s a question this homeowner asked us after we completed their switchboard upgrade in Bossley Park.

There’s no one-size-fits-all answer. The age and condition of the electrical installation, previous work and any warning signs around the home all need to be considered.

On an older property like this, we recommend keeping on top of the electrical installation rather than waiting until something stops working.

Older power points, switches, wiring and switchboards can all deteriorate over time, and problems aren’t always obvious to the homeowner.

📍 Bossley Park, NSW

If you’re unsure about the condition of the electrical system in your home, M & J Electrical Works can carry out an assessment and explain what we find.

#BossleyPark #ElectricalSafety #HomeElectricalSafety #WesternSydneyElectrician #mandjelectricalworks

42 1

mandjelectricalworks

View Instagram post by mandjelectricalworks

Aug 18

Open post by mandjelectricalworks with ID 18090939968448423

Ever wondered what the surge protector in your switchboard actually does? ⚡

We recently upgraded the switchboard at this home in Bossley Park, and the homeowner had a great question about the new surge protection.

A surge protection device is designed to help protect electrical equipment in the home from damaging voltage surges.

Just as importantly, we don’t want to install a new switchboard and leave without the homeowner understanding what’s actually been installed.

That’s why we take the time to walk our customers through the work and answer their questions before we leave.

📍 Bossley Park, NSW

Not sure what protection you have in your switchboard? M & J Electrical Works can inspect it and explain exactly what you’re looking at.

#BossleyPark #SurgeProtection #SwitchboardUpgrade #ElectricalSafety #mandjelectricalworks

66 5

mandjelectricalworks

View Instagram post by mandjelectricalworks

Aug 13

Open post by mandjelectricalworks with ID 18083533046676343

A faulty cooktop circuit led us to something much more important. ⚡

We were called to this home in Bossley Park after the cooktop suddenly lost power.

We traced the immediate problem to a faulty breaker, but once we inspected the switchboard we found the circuits didn’t have safety-switch protection.

Rather than just fixing the one fault and walking away, we spoke with the homeowners about the condition of the board and upgraded the protection so they could feel confident in their home’s electrical system.

Sometimes the problem you notice isn’t the only thing worth checking.

📍 Bossley Park, NSW

Not sure what’s actually protecting the circuits in your switchboard? M & J Electrical Works can inspect it and explain exactly what you’re looking at.

#BossleyPark #SwitchboardUpgrade #ElectricalSafety #WesternSydneyElectrician #mandjelectricalworks

65 2

mandjelectricalworks

View Instagram post by mandjelectricalworks

Aug 10

Open post by mandjelectricalworks with ID 18104245580127471

Finishing the electrical work is only part of the job. ⚡

Before we leave, we thoroughly test the circuits we’ve worked on, record the results and explain everything to the homeowner so they know exactly what’s been done.

Because you shouldn’t have to just take an electrician’s word for it.

You should know your electrical work has been tested properly, understand what was completed and feel confident everything is operating safely.

That’s how we like to leave every home.

📍 This one was in Bossley Park.

Would you expect your electrician to provide this level of testing and explanation?

#BossleyPark #WesternSydneyElectrician #ElectricalSafety #LocalElectrician #mandjelectricalworks

68 1

mandjelectricalworks

View Instagram post by mandjelectricalworks

Jul 28

Open post by mandjelectricalworks with ID 18109252699826204

Power keeps tripping at home? Don’t keep forcing the switch back on. ⚡

You can try resetting it once. If it trips again, unplug the appliances connected to that circuit and try once more.

If it still won’t stay on, leave it off. The safety switch may be doing exactly what it was designed to do…protecting you from an electrical fault.

Repeated tripping can be caused by an appliance, damaged wiring, moisture or another fault that needs proper testing.

Save this video so you know what to do next time…and send it to someone who always gets nominated to “fix the power.” 😅

Need the fault properly diagnosed?
Send M & J Electrical Works a message.

#WesternSydneyElectrician #ElectricalFault #SafetySwitch #ElectricalSafety #mandjelectricalworks

107 9

mandjelectricalworks

View Instagram post by mandjelectricalworks

Jul 23

Open post by mandjelectricalworks with ID 18137494714508873

One thing we never skip is testing.

Anyone can replace electrical equipment, but making sure it’s operating safely before we leave is just as important.

Every job finishes with testing, verification and making sure everything is working exactly as it should.

It’s not always the part homeowners see, but it’s one of the most important parts of the job.

If you’re looking for an electrician who takes the time to do things properly, we’d love to help.

📍Servicing Western Sydney.

#WesternSydneyElectrician
#ElectricalSafety
#SwitchboardUpgrade
#HomeMaintenance
#mandjelectricalworks

67 6

mandjelectricalworks

View Instagram post by mandjelectricalworks

Jul 21

Open post by mandjelectricalworks with ID 18125586172680988

Most electrical faults aren’t as obvious as they seem.

The homeowner thought one thing was causing the problem… but after a proper inspection, the real issue was something completely different.

This is why we always diagnose first instead of guessing.

Have you ever had an electrical problem that turned out to be something unexpected?

#SwitchboardUpgrade
#WesternSydneyElectrician
#ElectricalSafety
#ElectricianLife
#mandjelectricalworks

65 1

mandjelectricalworks

View Instagram post by mandjelectricalworks

Jul 16

Open post by mandjelectricalworks with ID 17875633881523088

A lot of people think our job finishes when the power comes back on.

For us, that’s actually when one of the most important parts begins.

We take the time to walk homeowners through exactly what we’ve done, show them how their new switchboard works, answer any questions and make sure they’re comfortable before we leave.

We also believe the house should be left as clean as we found it (or cleaner).

Electrical work can be confusing, but it doesn’t have to be.

If you’re trusting someone to work on one of the most important safety systems in your home, you deserve to understand what has been installed and why.

That’s the standard we hold ourselves to on every job.

M & J Electrical Works

#WesternSydneyElectrician
#SwitchboardUpgrade
#ElectricianLife
#HomeSafety
#mandjelectricalworks

59 2

mandjelectricalworks

View Instagram post by mandjelectricalworks

Jul 14

Open post by mandjelectricalworks with ID 18101407238090969

Most people think a switchboard upgrade is just swapping a few breakers… but there’s a lot more that goes into doing it properly.

Every installation is different, and taking shortcuts isn’t an option when you’re working on something that protects your home and family.

We take the time to do it once, do it properly and stand behind our work.

If you’ve got questions about your switchboard, send us a message. We’re always happy to help.

M & J Electrical Works

#SwitchboardUpgrade
#WesternSydneyElectrician
#HomeSafety
#electrician
#mandjelectricalworks

76 2

mandjelectricalworks

View Instagram post by mandjelectricalworks

Jul 9

Open post by mandjelectricalworks with ID 18080976380657891

site supervisor…

Ours just happened to have four legs. 🐶

He kept a close eye on us from the moment we arrived until the last bit of dust was swept up.

Thankfully we passed inspection. 😂

Jokes aside, this switchboard upgrade was all about making the home safer while keeping the power interruption to a minimum.

We also believe the job isn’t finished until we’ve cleaned up and left your home exactly how we’d want someone to leave ours.

Thanks for having us…it was a pleasure. 🫶🏽

#mandjelectricalworks
#SydneyElectrician
#LocalElectrician
#Electrical
#SwitchboardUpgrade

76 4

05FAQ

Appliance installation questions

Do I need an electrician to install an oven or cooktop?

If the appliance is hard-wired — most ovens, cooktops and many rangehoods are — the connection must be made by a licensed electrician in NSW. Plug-in appliances can go into an existing socket, but adding a new socket or a new circuit is electrical work too. Send us the make and model and we will confirm exactly what your unit needs before we arrive.

Will a new induction cooktop work with my existing wiring?

Not always. Induction cooktops often draw considerably more current than the ceramic or gas unit they replace, so the existing cable and circuit breaker can be undersized. We check the rating plate against the circuit before connecting — if the cable needs upsizing, it appears in the written quote, not as a surprise after switch-on.

What is a dedicated appliance circuit, and when do I need one?

A dedicated circuit runs from the switchboard to a single appliance with its own protection. High-draw appliances like ovens, induction cooktops and some dryers either require one or run far better on one — sharing a general power circuit is a common cause of nuisance tripping. We check your switchboard has the capacity before we quote.

Can you install the new appliance the same day the old one comes out?

Usually, yes. If you send the make and model plus a photo of the space when you book, we confirm the circuit is suitable in advance, then disconnect the old unit, connect the new one and test it under load in a single visit.

Do you test the appliance after installation?

Every time. Hard-wired appliances are tested under load and their protection is verified before we leave, and the electrical work comes with the required compliance documentation.

Can you disconnect and remove the old appliance?

Yes — mention it when you book and we will disconnect the old unit safely and take it away if you like, so the whole swap happens in one visit.

Got a new appliance waiting?

Tell us what it is and where it's going — we'll usually have it connected within days.

Call 0452 473 532 contact@mandjelectricalworks.com.au

What are we installing? — e.g. New 900mm oven and induction cooktop, old ones still in place…

Other services

◍Fault finding ◍Switchboards ◍Power points ◍Lighting ◍Ceiling & exhaust fans ◍Data & TV antenna ◍EV chargers ◍Solar & batteries ◍Home automation ◍CCTV & security ◍Thermal imaging ◍Testing & tagging ◍RCD testing ◍Residential ◍Commercial & strata

"*" indicates required fields

URL

This field is for validation purposes and should be left unchanged.

Full name*

Phone*

Email*

Suburb*

Postcode

Are you the owner?

What do you need help with?*

Tell us about the job

Photos (optional)

Drop files here or

Accepted file types: jpg, jpeg, png, heic, heif, webp, Max. file size: 25 MB, Max. files: 5.

Photos are resized in your browser before uploading, so large phone photos are fine.

Appliances connected safely, working the day they arrive

Kitchen and laundry appliances, wired in properly

Ovens

Cooktops

Rangehoods

Dishwashers

Dryers

Dedicated appliance circuits

From box to working

Tell us the appliance

Fixed quote

Install & connect

Test & demonstrate

Installed to spec, warranty intact

Straight off the tools

Appliance installation questions

More on this topic

Got a new appliance waiting?