How often does equipment need testing?

It depends on the environment. Construction and demolition sites are three-monthly; most offices are annual or longer. We'll confirm the correct interval for your workplace.

Is it a legal requirement?

Work health and safety law requires electrical equipment to be safe. Testing and tagging to AS/NZS 3760 is the accepted way to demonstrate you've met that duty.

Will you disrupt our operations?

Minimally. We schedule around your hours and work area by area — most offices barely notice we're there.

What happens if something fails?

It's tagged out and removed from service immediately, and listed in your report with a recommendation to repair or replace.

Do you provide a register?

Yes — a full asset register with test dates, results and next-due dates, issued after each round and maintained between visits.

Do you cover rental properties?

Yes, including furnished rentals and short-stay properties where supplied appliances need to be demonstrably safe.

Services / RCD testing

RCD testing that proves your safety switches work

Your safety switches are the last line of defence against electric shock. We trip-test every RCD with proper instruments, record the results and report anything that needs attention — for workplaces, rentals and strata across Sydney.

Call 0452 473 532 Request an assessment

EXCELLENT★★★★★5.0 · 125+ Google reviews

★★★★★ 5.0 · 125+ Google reviewsNSW Electrical Contractor Licence 359722CNECA MemberClear written pricing before workTesting & compliance documentationFamily-owned local team

01What we check

More than a push of the test button

The button only proves the mechanism moves. Real testing proves it trips fast enough to save a life.

Visual inspection

The device, its connections and the board around it — checked for damage, heat and loose terminations.

Trip-time testing

Calibrated instruments simulate a fault and measure the milliseconds your RCD takes to disconnect.

Push-button function

The mechanical test every device should pass monthly — we do it and show you how.

Load condition checks

We verify the RCD behaves correctly under the loads it actually protects, not just in isolation.

Detailed reporting

Results for every device, documented to AS/NZS 3760 — ready for your records or your insurer.

Repairs & upgrades

A failed device is replaced on the spot where possible — the van carries common RCDs and RCBOs.

02Our process

Tested, recorded, reported

Walk the site

We identify every RCD across your boards and agree access and timing that suits your operation.

Test each device

Push-button and instrument trip-time tests on every device, with minimal disruption to power.

Tag & record

Each device is labelled with the test date and result, and logged against its circuit.

Report & fix

You get a written report of results and recommendations — failed devices quoted or replaced same visit.

Electrician showing the difference between a safety switch and a circuit breaker

Watch · 0:20

How to tell if you have a safety switch

03Our promise

Compliance without the runaround

RCD testing is easy to put off and easier to do badly. We keep it painless: we schedule around your business, test methodically, and hand you a report that satisfies your obligations — then remind you when the next round is due.

✓Tested to AS/NZS 3760 with calibrated instruments

✓Written report and device register supplied

✓Failed devices replaced same visit where possible

04Instagram